PocketWizard FlexTT5 Transceiver Radio Slave for Canon
- Combination Transmitter/Receiver
- High Speed Sync up to 1/8000th Sec.
- On-Camera Hot Shoe
- Triggers Flash or Camera
- 32 Channels, Multi-Zone
- Triggers All Pocket Wizards
- Standard Triggering with Most Cameras
- USB Upgradeable
The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.
The FlexTT5 is the ideal addition to most Canon E-TTL II flash system. Since this system works on digital radio technology, it can support E-TTL operation around corners, out-of-sight, or in bright sunlight.
The FlexTT5 is a "Transceiver", meaning it can be used either as a transmitter when placed into the camera's hot shoe in combination with another FlexTT5 unit on the flash end, or as a receiver with a MiniTT1 transmitter-only unit placed on the camera's hot shoe.
2 Channel Settings + Learn Mode
- Out of the box, the FlexTT5 is programmed for PocketWizard channels 1 and 2. Each setting can also be programmed to transmit and receive any of 20 ControlTL channels for TTL photography and/or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch which integrates with Canon zones and ratios. The Learn Mode enables programming channels in the field with other PocketWizard radios.
- HyperSync & High-Speed Sync Technology
- Enables X-sync speeds of up to 1/8000 with full-power flash. High-Speed Sync provides auto flash with the camera's shutter speed setting, up to 1/8000th. Unique programming optimizes HSS for better operation and more shots per set of batteries.
- Built-In Hot Shoe, Use with Any Flash
- Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only. Hot shoe contacts automatically detect dedicated ETTL or simple hot shoe flash.
- Built-in Hot Shoe
- Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only.
- Camera/Flash Ports
- The FlexTT5 Transceiver has two plug-in ports for use with remote Canon E-TTL II cameras or other non-TTL flash units. Camera remote triggering requires use of a camera-specific ACC-type cable.
- Reverse Compatible + Basic Triggering
- Operates on the same channels as all other PocketWizards to work with any unit you may already have. Basic Triggering mode enables standard use with virtually any hot-shoe camera.
- Remote Camera Triggering/Relay Mode
- This mode can be used to trigger a camera remotely and requires use of a camera-specific ACC-type cable. Auto Relay Mode allows you to trigger a remote camera in sync with a remote flash.
- Low-Profile Design
- The FlexTT5 lies flat to stay out of the way and uses a flip-up antenna for additional range when needed.
- Configurable and Upgradeable
- The FlexTT5 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. The included PocketWizard Utility software allows you to select custom settings through the USB connection and to set it to use specific channels used by other Pocked Wizard units.